teldra/vp-build
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

chrony: update to 1.31.

Browse Source
This commit is contained in:
Eivind Uggedal 2014-10-02 07:59:09 +00:00
parent 0a99017db6
commit d418662fdc
2 changed files with 29 additions and 30 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

41
srcpkgs/chrony/files/chrony.conf
View File

@ -40,21 +40,21 @@
# more 'NTP servers'. You will probably find that your Internet Service
# Provider or company have one or more NTP servers that you can specify.
# Failing that, there are a lot of public NTP servers. There is a list
# you can access at
# http://www.eecis.udel.edu/~mills/ntp/servers.htm.
# you can access at http://support.ntp.org/bin/view/Servers/WebHome or
# you can use servers from the pool.ntp.org project.
server 0.pool.ntp.org
server 1.pool.ntp.org
server 2.pool.ntp.org
server 0.pool.ntp.org iburst
server 1.pool.ntp.org iburst
server 2.pool.ntp.org iburst
# However, for dial-up use you probably want these instead. The word
# 'offline' means that the server is not visible at boot time. Use
# chronyc's 'online' command to tell chronyd that these servers have
# become visible after you go on-line.
! server ntp0.your-isp.com offline
! server ntp1.your-isp.com offline
! server ntp.public-server.org offline
! server 0.pool.ntp.org offline
! server 1.pool.ntp.org offline
! server 2.pool.ntp.org offline
# You may want to specify NTP 'peers' instead. If you run a network
# with a lot of computers and want several computers running chrony to
@ -106,6 +106,9 @@ keyfile /var/db/chrony/keys
commandkey 1
# With this directive a random password will be generated automatically.
generatecommandkey
# chronyd can save the measurement history for the servers to files when
# it it exits. This is useful in 2 situations:
#
@ -133,17 +136,16 @@ pidfile /run/chronyd.pid
#######################################################################
### INITIAL CLOCK CORRECTION
# This option is only useful if your NTP servers are visible at boot
# time. This probably means you are on a LAN. If so, the following
# option will choose the best-looking of the servers and correct the
# system time to that. The value '10' means that if the error is less
# This option is useful to quickly correct the clock on start if it's
# off by a large amount. The value '10' means that if the error is less
# than 10 seconds, it will be gradually removed by speeding up or
# slowing down your computer's clock until it is correct. If the error
# is above 10 seconds, an immediate time jump will be applied to correct
# it. Some software can get upset if the system clock jumps (especially
# backwards), so be careful!
# it. The value '1' means the step is allowed only on the first update
# of the clock. Some software can get upset if the system clock jumps
# (especially backwards), so be careful!
! initstepslew 10 ntp0.your-company.com ntp1.your-company.com ntp2.your-company.com
! makestep 10 1
#######################################################################
### LOGGING
@ -154,7 +156,7 @@ pidfile /run/chronyd.pid
# need help in debugging a problem.
logdir /var/log/chrony
#log measurements statistics tracking
! log measurements statistics tracking
# If you have real time clock support enabled (see below), you might want
# this line instead:
@ -255,13 +257,6 @@ log measurements statistics tracking rtc
# put into chronyc to allow you to modify chronyd's parameters. By
# default all you can do is view information about chronyd's operation.
# Some people have reported that the need the following line to allow
# chronyc to work even on the same machine. This should not be
# necessary, and the problem is being investigated. You can leave this
# line enabled, as it's benign otherwise.
cmdallow 127.0.0.1
#######################################################################
### REAL TIME CLOCK
# chronyd can characterise the system's real-time clock. This is the

18
srcpkgs/chrony/template
View File

@ -1,7 +1,7 @@
# Template file for 'chrony'
pkgname=chrony
version=1.30
revision=2
version=1.31
revision=1
build_style=gnu-configure
configure_args="--without-nss"
hostmakedepends="pkg-config"
@ -17,14 +17,18 @@ maintainer="Juan RP <xtraeme@gmail.com>"
license="GPL-2"
homepage="http://chrony.tuxfamily.org/"
distfiles="http://download.tuxfamily.org/chrony/$pkgname-$version.tar.gz"
checksum=43aca956a0beb2c4847feffc847fec2c429ee9afb6252c7a499bbd68933046dd
checksum=a35e1cae46ecbe14af2023bb47a72a03d79591b2ff65f0072b3400153224996d
build_options="systemd"
post_install() {
vinstall ${FILESDIR}/chrony.conf 644 etc
vinstall ${FILESDIR}/chrony.service 644 usr/lib/systemd/system
rm -rf ${DESTDIR}/usr/share/doc
# for systemd-timedated.
vmkdir usr/lib/systemd/ntp-units.d
echo "chrony.service" > ${DESTDIR}/usr/lib/systemd/ntp-units.d/50-chrony.list
if [ "$build_option_systemd" ]; then
vinstall ${FILESDIR}/chrony.service 644 usr/lib/systemd/system
# for systemd-timedated.
vmkdir usr/lib/systemd/ntp-units.d
echo "chrony.service" > ${DESTDIR}/usr/lib/systemd/ntp-units.d/50-chrony.list
fi
}