The XBPS source packages manual =============================== Juan RP :Author Initials: JRP :toc: :icons: :numbered: :website: http://www.voidlinux.eu This article contains an exhaustive manual of how to create new source packages for XBPS, the package manager of the *Void Linux distribution*. Introduction ------------ The `xbps-packages` repository contains all `source` packages that are the recipes to download, compile and build binary packages for `Void`. Those `source` package files are called `templates`. The `template files` are `GNU bash` shell scripts that must define some required/optional `variables` and `functions` that are processed by `xbps-src` (the package builder) to generate the resulting binary packages. A simple `template` example is as follows: -------------------------------------------------------------------------- # Template file for 'foo' ## source section pkgname="foo" version="1.0" revision="1" build_style="gnu-configure" short_desc="A short description max 72 chars" maintainer="name " license="GPL-3" homepage="http://www.foo.org" distfiles="http://www.foo.org/foo-${version}.tar.gz" checksum="fea0a94d4b605894f3e2d5572e3f96e4413bcad3a085aae7367c2cf07908b2ff" ## package section foo_package() { pkg_install() { vmove all } } --------------------------------------------------------------------------- There are two main `sections` in a template: the `source section` and the `package section`. The `source section` contains definitions to download, build and install the package files to a `fake destdir`. The `package section` contains the definitions to how the resulting binary packages are generated. A template always requires at least a `source section` and a `package section`; multiple `package sections` can be defined to generate `multiple binary packages`. Don't worry if anything is not clear as it should be. The reserved `variables` and `functions` will be explained later. This `template` file should be created in a directory matching `$pkgname`, i.e: `xbps-packages/srcpkgs/foo/template`. If everything went fine after running `xbps-src build-pkg` a binary package called `foo-1.0_1..xbps` will be generated in the local repository. Package build phases -------------------- Building a package consist of the following phases: *fetch*:: This phase downloads required sources for a `source package`, as defined by the `distfiles` variable or `do_fetch()` function. *extract*:: This phase extracts the `distfiles` files into `$wrksrc` or executes the `do_extract()` function, which is the directory to be used to compile the `source package`. *configure*:: This phase executes the `configuration` of a `source package`, i.e `GNU configure scripts`. *build*:: This phase compiles/prepares the `source files` via `make` or any other compatible method. *install-destdir*:: This phase installs the `package files` into a `fake destdir`, via `make install` or any other compatible method. *build-pkg*:: This phase builds the `binary packages` with files stored in the `package destdir`. `xbps-src` supports running just the specified phase, and if it ran successfully, the phase will be skipped later (unless its work directory `${wrksrc}` is removed with `xbps-src clean`). Global functions ---------------- The following functions are defined by `xbps-src` and can be used on any template: *vinstall()*:: `vinstall []` Installs `file` with the specified `mode` into `targetdir` in `$DESTDIR` (if called from a `source section`) or `$PKGDESTDIR` (if called from a `package section`). The optional 4th argument can be used to change the `file name`. *vcopy()*:: `vcopy ` Copies resursively all files in `pattern` to `targetdir` on `$DESTDIR` (if called from a `source section`) or `$PKGDESTDIR` (if called from a `package section`). *vmove()*:: `vmove ` Moves `pattern` to the specified directory in `$DESTDIR` (if called from a `source section`) or `$PKGDESTDIR` (if called from a `package section`). *vmkdir()*:: `vmkdir []` Creates a directory in `$DESTDIR` (if called from a `source section`) or $PKGDESTDIR` (if called from a `package section`). The 2nd optional argument sets the mode of the directory. NOTE: shell wildcards must be properly quoted. Global variables ---------------- The following variables are defined by `xbps-src` and can be used on any template: *makejobs*:: Set to `-jX` if `XBPS_MAKEJOBS` is defined, to allow parallel jobs with `GNU make`. *sourcepkg*:: Set to the to main package name, can be used to match the main package rather than additional binary package names. *CHROOT_READY*:: True if the target chroot (masterdir) is ready for chroot builds. *CROSS_BUILD*:: True if `xbps-src` is cross compiling a package. *DESTDIR*:: Full path to the fake destdir used by the `source section`, set to `${XBPS_MASTERDIR}/destdir/${sourcepkg}-${version}`. *PKGDESTDIR*:: Full path to the fake destdir used by the `pkg_install()` function in the `package section`, set to `${XBPS_MASTERDIR}/destdir/pkg-${pkgname}-${version}`. *XBPS_MACHINE*:: The machine architecture as returned by `uname -m`. *XBPS_SRCDISTDIR*:: Full path to where the `source distfiles` are stored, i.e `$XBPS_HOSTDIR/sources`. *XBPS_SRCPKGDIR*:: Full path to the `srcpkgs` directory. *XBPS_TARGET_MACHINE*:: The target machine architecture when cross compiling a package. Source section -------------- Mandatory variables ~~~~~~~~~~~~~~~~~~~ The list of mandatory variables in the `source section`: *homepage*:: A string pointing to the `upstream` homepage. *license*:: A string matching any license file available in `/usr/share/licenses`. Multiple licenses should be separated by commas, i.e `GPL-3, LGPL-2.1`. *maintainer*:: A string in the form of `name `. *pkgname*:: A string with the package name, matching `srcpkgs/`. *revision*:: A number that must be set to 1 when the `source package` is created, or updated to a new `upstream version`. This should only be increased when the generated `binary packages` have been modified. *short_desc*:: A string with a brief description for this package. Max 72 chars. *version*:: A string with the package version. Must not contain dashes and at least one digit is required. Optional variables ~~~~~~~~~~~~~~~~~~ *hostmakedepends*:: The list of `host` dependencies required to build the package. Dependencies can be specified with the following version comparators: `<`, `>`, `<=`, `>=` or `foo-1.0_1` to match an exact version. If version comparator is not defined (just a package name), the version comparator is automatically set to `>=0`. Example `hostmakedepends="foo blah<1.0"`. *makedepends*:: The list of `target` dependencies required to build the package. Dependencies can be specified with the following version comparators: `<`, `>`, `<=`, `>=` or `foo-1.0_1` to match an exact version. If version comparator is not defined (just a package name), the version comparator is automatically set to `>=0`. Example `makedepends="foo blah>=1.0"`. *bootstrap*:: If enabled the source package is considered to be part of the `bootstrap` process and required to be able to build packages in the chroot. Only a small number of packages must set this property. *distfiles*:: The full URL to the `upstream` source distribution files. Multiple files can be separated by blanks. The files must end in `.tar.lzma`, `.tar.xz`, `.txz`, `.tar.bz2`, `.tbz`, `.tar.gz`, `.tgz`, `.gz`, `.bz2`, `.tar` or `.zip`. Example `distfiles="http://foo.org/foo-1.0.tar.gz"` *checksum*:: The `sha256` digests matching `${distfiles}`. Multiple files can be separated by blanks. Please note that the order must be the same than was used in `${distfiles}`. Example `checksum="kkas00xjkjas"` *long_desc*:: A long description of the main package. Max 80 chars per line and must not contain the following characters: `&`, `<`, `>`. *wrksrc*:: The directory name where the package sources are extracted, by default set to `${pkgname}-${version}`. *build_wrksrc*:: A directory relative to `${wrksrc}` that will be used when building the package. *create_wrksrc*:: Enable it to create the `${wrksrc}` directory. Required if a package contains multiple `distfiles`. *only_for_archs*:: This expects a separated list of architectures where the package can be built matching `uname -m` output. Example `only_for_archs="x86_64 armv6l"` *build_style*:: This specifies the `build method` for a package. Read below to know more about the available package `build methods`. If `build_style` is not set, the package must define at least a `do_install()` function, and optionally more build phases as such `do_configure()`, `do_build()`, etc. *create_srcdir*:: This creates a directory in `${XBPS_SRCDISTDIR}` as such `${pkgname}-${version}` to store the package sources at the `extract` phase. Required in packages that use unversioned ${distfiles}`. *configure_script*:: The name of the `configure` script to execute at the `configure` phase if `${build_style}` is set to `configure` or `gnu-configure` build methods. By default set to `./configure`. *configure_args*:: The arguments to be passed in to the `configure` script if `${build_style}` is set to `configure` or `gnu-configure` build methods. By default, prefix must be set to `/usr`. In `gnu-configure` packages, some options are already set by default: `--prefix=/usr --sysconfdir=/etc --infodir=/usr/share/info --mandir=/usr/share/man --localstatedir=/var`. *make_cmd*:: The executable to run at the `build` phase if `${build_style}` is set to `configure`, `gnu-configure` or `gnu-makefile` build methods. By default set to `make`. *make_build_args*:: The arguments to be passed in to `${make_cmd}` at the build phase if `${build_style}` is set to `configure`, `gnu-configure` or `gnu_makefile` build methods. Unset by default. *make_install_args*:: The arguments to be passed in to `${make_cmd}` at the `install-destdir` phase if `${build_style}` is set to `configure`, `gnu-configure` or `gnu_makefile` build methods. Unset by default. *make_build_target*:: The target to be passed in to `${make_cmd}` at the build phase if `${build_style}` is set to `configure`, `gnu-configure` or `gnu_makefile` build methods. Unset by default (`all` target). *make_install_target*:: The target to be passed in to `${make_cmd}` at the `install-destdir` phase if `${build_style}` is set to `configure`, `gnu-configure` or `gnu_makefile` build methods. By default set to `DESTDIR=${DESTDIR} install`. *patch_args*:: The arguments to be passed in to the `patch(1)` command when applying patches to the package sources after `do_extract()`. Patches are stored in `srcpkgs//patches` and must be in `-p0` format. By default set to `-Np0`. *disable_parallel_build*:: If set the package won't be built in parallel and `XBPS_MAKEJOBS` has no effect. *keep_libtool_archives*:: If enabled the `GNU Libtool` archives won't be removed. By default those files are always removed automatically. *skip_extraction*:: A list of filenames that should not be extracted in the `extract` phase. This must match the basename of any url defined in `${distfiles}`. Example `skip_extraction="foo-${version}.tar.gz"`. *force_debug_pkgs*:: If enabled binary packages with debugging symbols will be generated even if `XBPS_DEBUG_PKGS` is disabled in `xbps-src.conf` or in the `command line arguments`. build style scripts ~~~~~~~~~~~~~~~~~~~ The `build_style` variable specifies the build method to build and install a package. It expects the name of any available script in the `/usr/share/xbps-src/build_style` directory. Please note that required packages to execute a `build_style` script must be defined via `hostmakedepends`. The current list of available `build_style` scripts is the following: *cmake*:: For packages that use the CMake build system, configuration arguments can be passed in via `configure_args`. *configure*:: For packages that use non-GNU configure scripts, at least `--prefix=/usr` should be passed in via `configure_args`. *gnu-configure*:: For packages that use GNU configure scripts, additional configuration arguments can be passed in via `configure_args`. *gnu-makefile*:: For packages that use GNU make, build arguments can be passed in via `make_build_args` and install arguments via `make_install_args`. The build target can be overriden via `make_build_target` and the install target *meta*:: For `meta-packages`, i.e packages that only install local files or simply depend on additional packages. *perl-ModuleBuild*:: For packages that use the Perl http://search.cpan.org/~leont/Module-Build-0.4202/lib/Module/Build.pm[Module::Build] method. *perl*:: For packages that use the Perl http://perldoc.perl.org/ExtUtils/MakeMaker.html[ExtUtils::MakeMaker] build method. *python-module*:: For packages that use the Python module build method (setup.py). *waf3*:: For packages that use the Python3 `waf` build method with python3. *waf*:: For packages that use the Python `waf` method with python2. Functions ~~~~~~~~~ The following functions can be defined to change the behavior of how the package is downloaded, compiled and installed. *do_fetch()*:: if defined and `distfiles` is not set, use it to fetch the required sources. *do_extract()*:: if defined and `distfiles` is not set, use it to extract the required sources. *post_extract()*:: Actions to execute after `do_extract()`. *pre_configure()*:: Actions to execute after `post_extract()`. *do_configure()*:: Actions to execute to configure the package; `${configure_args}` should still be passed in if it's a GNU configure script. *post_configure()*:: Actions to execute after `do_configure()`. *pre_build()*:: Actions to execute after `post_configure()`. *do_build()*:: Actions to execute to build the package. *post_build()*:: Actions to execute after `do_build()`. *pre_install()*:: Actions to execute after `post_build()`. *do_install()*:: Actions to execute to install the packages files into the `fake destdir`. *post_install()*:: Actions to execute after `do_install()`. NOTE: A function defined in a template has preference over the same function defined by a `build_style` script.