84 lines
2.9 KiB
Plaintext
84 lines
2.9 KiB
Plaintext
# $NetBSD: ntp.conf,v 1.9 2007/02/10 19:36:56 reed Exp $
|
|
#
|
|
# NetBSD default Network Time Protocol (NTP) configuration file for ntpd
|
|
|
|
# This file is intended to be both a usable default, and a Quick-Start
|
|
# Guide. The directives and options listed here are not at all complete.
|
|
# A great deal of additional documentation, including links to FAQS and
|
|
# other guides, may be found on the official NTP web site, in particular
|
|
#
|
|
# http://www.ntp.org/documentation.html
|
|
#
|
|
|
|
# Process ID file, so that the daemon can be signalled from scripts
|
|
|
|
pidfile /var/run/ntpd.pid
|
|
|
|
# The correction calculated by ntpd(8) for the local system clock's
|
|
# drift is stored here.
|
|
|
|
driftfile /var/db/ntpd.drift
|
|
|
|
# Suppress the syslog(3) message for each peer synchronization change.
|
|
|
|
logconfig -syncstatus
|
|
|
|
# This will help minimize disruptions due to network congestion. Don't
|
|
# do this if you configure only one server!
|
|
|
|
tos minsane 2
|
|
|
|
# Hereafter should be "server" or "peer" statements to configure other
|
|
# hosts to exchange NTP packets with. Peers should be selected in such
|
|
# a way that the network path to them is symmetric (that is, the series
|
|
# of links and routers used to get to the peer is the same one that the
|
|
# peer uses to get back. NTP assumes such symmetry in its network delay
|
|
# calculation. NTP will apply an incorrect adjustment to timestamps
|
|
# received from the peer if the path is not symmetric. This can result
|
|
# in clock skew (your system clock being maintained consistently wrong
|
|
# by a certain amount).
|
|
#
|
|
# The best way to select symmetric peers is to make sure that the
|
|
# network path to them is as short as possible (this reduces the chance
|
|
# that there is more than one network path between you and your peer).
|
|
# You can measure these distances with the traceroute(8) program. The
|
|
# best place to start looking for NTP peers for your system is within
|
|
# your own network, or at your Internet Service Provider (ISP).
|
|
#
|
|
# Ideally, you should select at least three other systems to talk NTP
|
|
# with, for an "what I tell you three times is true" effect.
|
|
#
|
|
|
|
#peer an.ntp.peer.goes.here
|
|
#server an.ntp.server.goes.here
|
|
|
|
# Public servers from the pool.ntp.org project. Volunteer's servers
|
|
# are dynamically assigned to the CNAMES below via DNS round-robin.
|
|
# The pool.ntp.org project needs more volunteers! The only criteria to
|
|
# join are a nailed-up connection and a static IP address. For details,
|
|
# see the web page:
|
|
#
|
|
# http://www.pool.ntp.org/
|
|
#
|
|
|
|
# The country codes can help you find servers that are net-wise close.
|
|
# As explained above, closer is better...
|
|
|
|
# Northern U.S.A
|
|
#server ca.pool.ntp.org
|
|
#server us.pool.ntp.org
|
|
#server us.pool.ntp.org
|
|
|
|
# Northern Europe
|
|
#server de.pool.ntp.org
|
|
#server de.pool.ntp.org
|
|
#server dk.pool.ntp.org
|
|
|
|
# Depending on the vagaries of DNS can occasionally pull in the same
|
|
# server twice. The following CNAMES are guaranteed to be disjoint, at
|
|
# least over some short interval.
|
|
|
|
server 0.pool.ntp.org
|
|
server 1.pool.ntp.org
|
|
server 2.pool.ntp.org
|