vp-build/common/xbps-src/libexec/build.sh
Juan RP b79077c930
xbps-src: install cross pkg after checking dependencies.
... this should help buildbot a bit more.
2019-07-10 21:07:16 +02:00

149 lines
4.9 KiB
Bash
Executable File

#!/bin/bash
#
# vim: set ts=4 sw=4 et:
#
# Passed arguments:
# $1 - current pkgname to build [REQUIRED]
# $2 - target pkgname (origin) to build [REQUIRED]
# $3 - xbps target [REQUIRED]
# $4 - cross target [OPTIONAL]
# $5 - internal [OPTIONAL]
if [ $# -lt 3 -o $# -gt 5 ]; then
echo "${0##*/}: invalid number of arguments: pkgname targetpkg target [cross-target]"
exit 1
fi
readonly PKGNAME="$1"
readonly XBPS_TARGET_PKG="$2"
readonly XBPS_TARGET="$3"
readonly XBPS_CROSS_BUILD="$4"
readonly XBPS_CROSS_PREPARE="$5"
export XBPS_TARGET
for f in $XBPS_SHUTILSDIR/*.sh; do
. $f
done
setup_pkg "$PKGNAME" $XBPS_CROSS_BUILD
readonly SOURCEPKG="$sourcepkg"
show_pkg_build_options
check_pkg_arch $XBPS_CROSS_BUILD
if [ -z "$XBPS_CROSS_PREPARE" ]; then
prepare_cross_sysroot $XBPS_CROSS_BUILD || exit $?
fi
if [ -z "$XBPS_DEPENDENCY" -a -z "$XBPS_TEMP_MASTERDIR" -a -n "$XBPS_KEEP_ALL" -a "$XBPS_CHROOT_CMD" = "proot" ]; then
remove_pkg_autodeps
fi
# Install dependencies from binary packages
if [ "$PKGNAME" != "$XBPS_TARGET_PKG" -o -z "$XBPS_SKIP_DEPS" ]; then
install_pkg_deps $PKGNAME $XBPS_TARGET_PKG pkg $XBPS_CROSS_BUILD $XBPS_CROSS_PREPARE || exit $?
fi
if [ "$XBPS_CROSS_BUILD" ]; then
install_cross_pkg $XBPS_CROSS_BUILD || exit $?
fi
# Fetch distfiles after installing required dependencies,
# because some of them might be required for do_fetch().
$XBPS_LIBEXECDIR/xbps-src-dofetch.sh $SOURCEPKG $XBPS_CROSS_BUILD || exit 1
[ "$XBPS_TARGET" = "fetch" ] && exit 0
# Fetch, extract, build and install into the destination directory.
$XBPS_LIBEXECDIR/xbps-src-doextract.sh $SOURCEPKG $XBPS_CROSS_BUILD || exit 1
[ "$XBPS_TARGET" = "extract" ] && exit 0
# Run patch phrase
$XBPS_LIBEXECDIR/xbps-src-dopatch.sh $SOURCEPKG $XBPS_CROSS_BUILD || exit 1
[ "$XBPS_TARGET" = "patch" ] && exit 0
# Run configure phase
$XBPS_LIBEXECDIR/xbps-src-doconfigure.sh $SOURCEPKG $XBPS_CROSS_BUILD || exit 1
[ "$XBPS_TARGET" = "configure" ] && exit 0
# Run build phase
$XBPS_LIBEXECDIR/xbps-src-dobuild.sh $SOURCEPKG $XBPS_CROSS_BUILD || exit 1
[ "$XBPS_TARGET" = "build" ] && exit 0
# Run check phase
$XBPS_LIBEXECDIR/xbps-src-docheck.sh $SOURCEPKG $XBPS_CROSS_BUILD || exit 1
[ "$XBPS_TARGET" = "check" ] && exit 0
# Install pkgs into destdir.
$XBPS_LIBEXECDIR/xbps-src-doinstall.sh $SOURCEPKG no $XBPS_CROSS_BUILD || exit 1
for subpkg in ${subpackages} ${sourcepkg}; do
$XBPS_LIBEXECDIR/xbps-src-doinstall.sh $subpkg yes $XBPS_CROSS_BUILD || exit 1
done
for subpkg in ${subpackages} ${sourcepkg}; do
$XBPS_LIBEXECDIR/xbps-src-prepkg.sh $subpkg $XBPS_CROSS_BUILD || exit 1
done
for subpkg in ${subpackages} ${sourcepkg}; do
if [ "$PKGNAME" = "${subpkg}" -a "$XBPS_TARGET" = "install" ]; then
exit 0
fi
done
# Clean list of preregistered packages
printf "" > ${XBPS_STATEDIR}/.${sourcepkg}_register_pkg
# If install went ok generate the binpkgs.
for subpkg in ${subpackages} ${sourcepkg}; do
$XBPS_LIBEXECDIR/xbps-src-dopkg.sh $subpkg "$XBPS_REPOSITORY" "$XBPS_CROSS_BUILD" || exit 1
done
# Registering packages at once per repository. This makes sure that staging is
# triggered for all new packages if any of them introduces inconsistencies.
cut -d: -f 1,2 ${XBPS_STATEDIR}/.${sourcepkg}_register_pkg | sort -u | \
while IFS=: read -r arch repo; do
paths=$(grep "^$arch:$repo:" "${XBPS_STATEDIR}/.${sourcepkg}_register_pkg" | \
cut -d : -f 2,3 | tr ':' '/')
if [ -n "${arch}" ]; then
msg_normal "Registering new packages to $repo ($arch)\n"
XBPS_TARGET_ARCH=${arch} $XBPS_RINDEX_CMD \
${XBPS_REPO_COMPTYPE:+--compression $XBPS_REPO_COMPTYPE} ${XBPS_BUILD_FORCEMODE:+-f} -a ${paths}
else
msg_normal "Registering new packages to $repo\n"
if [ -n "$XBPS_CROSS_BUILD" ]; then
$XBPS_RINDEX_XCMD ${XBPS_REPO_COMPTYPE:+--compression $XBPS_REPO_COMPTYPE} \
${XBPS_BUILD_FORCEMODE:+-f} -a ${paths}
else
$XBPS_RINDEX_CMD ${XBPS_REPO_COMPTYPE:+--compression $XBPS_REPO_COMPTYPE} \
${XBPS_BUILD_FORCEMODE:+-f} -a ${paths}
fi
fi
done
# pkg cleanup
if declare -f do_clean >/dev/null; then
run_func do_clean
fi
if [ -n "$XBPS_DEPENDENCY" -o -z "$XBPS_KEEP_ALL" ]; then
remove_pkg_autodeps
remove_pkg_wrksrc
remove_pkg $XBPS_CROSS_BUILD
remove_pkg_statedir
fi
# If base-chroot not installed, install "base-files" into masterdir
# from local repository; this is the only pkg required to be able to build
# the bootstrap pkgs from scratch.
if [ -z "$CHROOT_READY" -a "$PKGNAME" = "base-files" ]; then
msg_normal "Installing $PKGNAME into masterdir...\n"
_log=$(mktemp) || exit 1
XBPS_ARCH=$XBPS_MACHINE $XBPS_INSTALL_CMD -yf $PKGNAME >${_log} 2>&1
if [ $? -ne 0 ]; then
msg_red "Failed to install $PKGNAME into masterdir, see below for errors:\n"
cat ${_log}
rm -f ${_log}
msg_error "Cannot continue!\n"
fi
rm -f ${_log}
fi
exit 0